discount coupon €140 off

Frizzlife 1000 GPD tankless reverse osmosis system – remineralization, PD1000-TAM4

Model: PD1000-TAM4
Fast tankless RO water with mineral balance

€559,99 €699,99
€140 off
€140 off
CODE: JDE140

Certification

Geprüft nach NSF/ANSI 42, 53 & 58. Dieses System reduziert die unten aufgeführten Stoffe effektiv und sorgt dafür, dass die Konzentration im gefilterten Wasser die zulässigen Grenzwerte einhält oder unterschreitet.
Buy now

Service & Benefits

Fast,Free Shipping For Order Over $25
One-year free warranty(Register to get 150% coverage)
30-Day Return,No Worries guarantee
Lifetime Customer Support
Pay with Ease :
  • PayPal
  • American Express
  • Mastercard
  • Discover
  • Klarna
PD1000-TAM4 remineralized alkaline RO water system showing pH balance and minerals restoration
Alkaline and remineralized water

Remineralized RO water with the PD1000-TAM4

The PD1000-TAM4 is a tankless reverse osmosis system with a capacity of 1000 GPD and a TAM4 post-filter for remineralization. After RO filtration, the post-filter helps to reintroduce selected minerals via mineral-based filter media, thus making the taste of the purified water more balanced.

The PD1000-TAM4 thus combines a high-performance under-sink reverse osmosis system with a more pleasant drinking taste after filtration.

Tankless 1000 GPD RO system with remineralization
TAM4 post-filter stage
Contributes to a more balanced water after RO filtration.
Supports a more pleasant drinking taste
PD1000-TAM4 2:1 water saving reverse osmosis system showing low drain ratio comparison
Particularly water-saving ratio of 2:1

2:1 clean water-to-wastewater ratio for higher water efficiency

The PD1000-TAM4 uses an optimized, water-saving design with a purified water to wastewater ratio of 2:1. For every 2 cups of purified water, only 1 cup of wastewater is produced.

The wastewater can be reused for cleaning or other applications outside of drinking water use, thus contributing to more efficient water consumption in the household.

Clean water to wastewater ratio of 2:1
Less wastewater than with many conventional RO systems
Supports more efficient water consumption in the household
Wastewater reusable for non-drinking water purposes
PD1000-TAM4 high flow 1000 GPD tankless RO system filling glass quickly
High flow rate of 1000 GPD

1000 GPD capacity for rapid water delivery

The PD1000-TAM4 is designed for a high filtration capacity of up to 1000 gallons per day. This provides a consistent, stable flow rate for larger households or shared spaces.

With a tested flow rate of up to 0.7 gallons per minute, an 8-oz cup can be filled in approximately 5 seconds under optimal conditions.

Capacity of up to 1000 GPD
Stable flow with high performance
Tested flow rate of up to 0.7 GPM
Fast water release in daily use
PD1000-TAM4 smart panel real-time TDS monitoring and filter replacement indicator
Real-time TDS and filter life display

Intelligent TDS monitoring and filter status display

The integrated smart panel displays the TDS value in real time, allowing you to monitor the water quality at a glance. The readings are updated regularly, providing a continuous overview of the filtered water.

Color-coded indicators provide information about the filter status: Blue indicates normal operation, red indicates that a filter change may be necessary.

Real-time TDS monitoring
Smart filter change reminder
Color-coded status indicators
Easily monitor water quality
PD1000-TAM4 tankless reverse osmosis system compact design leak reduction structure
Tankless design with reduced risk of leakage

Space-saving tankless design with fewer potential leak points

The tankless design eliminates the need for a pressure storage tank. This saves space under the sink and avoids potential drawbacks of water being stored for extended periods.

Integrated water routing and fewer connection points help to reduce the potential risk of leakage while ensuring stable operation.

Tankless design saves space under the sink
No pressure storage tank required
Fewer connection points reduce potential leaks
Continuous supply of freshly filtered water
PD1000-TAM4 DIY installation under sink RO system with quick twist filter replacement
Self-assembly and quick filter change

Easy self-assembly and quick filter change with just one turn.

The PD1000-TAM4 is designed for straightforward installation with step-by-step instructions. Most users can install the system without professional plumbing assistance.

Filter changes are simplified by a practical twist-in mechanism, allowing cartridges to be replaced quickly and without complicated tools.

Suitable for self-assembly
Step-by-step installation instructions
Filter change with just one turn
No professional tools required
PD1000-TAM4 reverse osmosis system connected to refrigerator ice maker and IMC-1 kit usage
Versatile use and connection for ice cube makers

Compatible with refrigerator, ice maker and optional mini tank

The PD1000-TAM4 supports various applications, including connection to refrigerators or ice makers with compatible accessories such as the IMC-1.

In addition, the system can optionally be expanded with the separately available MWT3 mini tank and thus adapted to different household requirements.

Compatible with the connection kit for ice cube makers (IMC-1)
Connection to a refrigerator possible
Compatible with the optional MWT3 mini tank
Flexible uses in the household

Compare Frizzlife high-flow RO systems

The PD1000-TAM4 is suitable for households that want high daily water output, a space-saving tankless installation and improved taste through the remineralization stage after RO filtration.

NSF/ANSI Standards

View Report

ANSI 372

Lead Content Compliance for Drinking Water Contact Materials
NSF/ANSI/CAN 372 is a standard used to evaluate the lead content of materials and components that come into contact with drinking water. Products tested to this standard are evaluated against lead content requirements for drinking water system materials.
This standard focuses on lead content in water-contact materials. It should not be confused with contaminant reduction performance standards such as NSF/ANSI 42, 53, or 58.

Specs

Model
PD1000-TAM4
Use Cases
Under-Sink
Flow Rate
0.70 GPM / 1000GPD
Dimensions
PD1000: 5.3"L x 17.4"W x 15.5"
TAM4: 5" x 5" x 13.5"
GPD
1000
Drain ratio
2:1
Speicherlos
Installation
Need Installation
Drill a hole in the countertop
Electricity Required
Remineralization
Certification Explanation

NSF/ANSI 372
SGS Certified

Purification Method

0.0001 μm Reverse Osmosis Filtration
Alkaline/Remineralize

Material

1. Pleated Carbon Compound filter
2. 1000G RO membrane,
3. Alkaline Remineralization filter
4. Stainless steel faucet with brushed nickel finish.

User manual

FAQ

Why there are many white bubbles in the water?

Normally for the first time use of the RO system, the water seems to have white bubbles in it, which is normal and totally drinkable. It is because when the pump is pressurizing the water, it will pressurize the air at the same time. It will make the air molecules smaller, thus the solubility further increases. The air can’t be released at that time because of the pressure in the RO system.
However, when you turn on the tap to get a cup of water, the pressure of air is released. So you will see a huge number of bubbles in the water. It looks cloudy and white, but they are just bubbles. After you put the water still for a while, all bubbles will be gone, the water is totally good for drinking.

TDS tester pen shows higher result than the TDS number displayed on the PD1000-TAM4?

It is because the TAM4 filter, the post filter, adds the minerals to the water. Normally the TAM4 will increase the TDS by 10–30 ppm. If the system hasn’t been used for a while, the TAM4 will restore more minerals to the water, and at that time the water is very good, the pH level will be more than 9.

Why TDS is higher at the beginning, but back to normal range after about one minute?

Osmosis is a natural phenomenon happens in all RO system, no matter if you have a conventional RO system or tankless RO system. When the RO system starts to work, pressure from the pump overcomes natural osmotic pressure, forcing feed water through the RO membrane that removes the impurities.
When the RO system stops working, the pump stops offering pressure as well. At that time, because of different concentrations, a small fraction of ions will enter into pure water and cause TDS to rise by a small amount. However, even if the TDS reading is a little high at the beginning, the quality water is still unbeatable by any other filtration methods including carbon, KDF, ceramic, UF, UV, etc.
The water is totally good to drink and you don’t have to wait for about 1 minute to get the water, since the whole system will not release any harmful substances to the water.
The TDS removing rate for PD1000-TAM4 is about 94–95%, if your incoming TDS is high, the outlet TDS will be high too.

How does the TDS display on the machine work?

When the system is running, the TDS sensor in the PD1000 will keep testing the water quality every 1 minute.
Therefore, the TDS result you see from the machine is from the last test memory.
If you want to have the real-time TDS result, please let the machine run for about 1 minute.

If I don’t want to use the TAM4, how should I disconnect it?

You don’t have to disconnect the tubing and the fittings on the TAM4. You only need to unscrew the TAM4 filter and the water still can go through.

My granite is thicker than 1.5 inch and the faucet stem is not long enough, what should I do?

Please feel free to contact us at support@frizzlife.com to claim for a longer thread stem.

Installation video

Reviews

Frizzlife

Frizzlife 1000 GPD tankless reverse osmosis system – remineralization, PD1000-TAM4

€559,99 €699,99
PD1000-TAM4 remineralized alkaline RO water system showing pH balance and minerals restoration
Alkaline and remineralized water

Remineralized RO water with the PD1000-TAM4

The PD1000-TAM4 is a tankless reverse osmosis system with a capacity of 1000 GPD and a TAM4 post-filter for remineralization. After RO filtration, the post-filter helps to reintroduce selected minerals via mineral-based filter media, thus making the taste of the purified water more balanced.

The PD1000-TAM4 thus combines a high-performance under-sink reverse osmosis system with a more pleasant drinking taste after filtration.

Tankless 1000 GPD RO system with remineralization
TAM4 post-filter stage
Contributes to a more balanced water after RO filtration.
Supports a more pleasant drinking taste
PD1000-TAM4 2:1 water saving reverse osmosis system showing low drain ratio comparison
Particularly water-saving ratio of 2:1

2:1 clean water-to-wastewater ratio for higher water efficiency

The PD1000-TAM4 uses an optimized, water-saving design with a purified water to wastewater ratio of 2:1. For every 2 cups of purified water, only 1 cup of wastewater is produced.

The wastewater can be reused for cleaning or other applications outside of drinking water use, thus contributing to more efficient water consumption in the household.

Clean water to wastewater ratio of 2:1
Less wastewater than with many conventional RO systems
Supports more efficient water consumption in the household
Wastewater reusable for non-drinking water purposes
PD1000-TAM4 high flow 1000 GPD tankless RO system filling glass quickly
High flow rate of 1000 GPD

1000 GPD capacity for rapid water delivery

The PD1000-TAM4 is designed for a high filtration capacity of up to 1000 gallons per day. This provides a consistent, stable flow rate for larger households or shared spaces.

With a tested flow rate of up to 0.7 gallons per minute, an 8-oz cup can be filled in approximately 5 seconds under optimal conditions.

Capacity of up to 1000 GPD
Stable flow with high performance
Tested flow rate of up to 0.7 GPM
Fast water release in daily use
PD1000-TAM4 smart panel real-time TDS monitoring and filter replacement indicator
Real-time TDS and filter life display

Intelligent TDS monitoring and filter status display

The integrated smart panel displays the TDS value in real time, allowing you to monitor the water quality at a glance. The readings are updated regularly, providing a continuous overview of the filtered water.

Color-coded indicators provide information about the filter status: Blue indicates normal operation, red indicates that a filter change may be necessary.

Real-time TDS monitoring
Smart filter change reminder
Color-coded status indicators
Easily monitor water quality
PD1000-TAM4 tankless reverse osmosis system compact design leak reduction structure
Tankless design with reduced risk of leakage

Space-saving tankless design with fewer potential leak points

The tankless design eliminates the need for a pressure storage tank. This saves space under the sink and avoids potential drawbacks of water being stored for extended periods.

Integrated water routing and fewer connection points help to reduce the potential risk of leakage while ensuring stable operation.

Tankless design saves space under the sink
No pressure storage tank required
Fewer connection points reduce potential leaks
Continuous supply of freshly filtered water
PD1000-TAM4 DIY installation under sink RO system with quick twist filter replacement
Self-assembly and quick filter change

Easy self-assembly and quick filter change with just one turn.

The PD1000-TAM4 is designed for straightforward installation with step-by-step instructions. Most users can install the system without professional plumbing assistance.

Filter changes are simplified by a practical twist-in mechanism, allowing cartridges to be replaced quickly and without complicated tools.

Suitable for self-assembly
Step-by-step installation instructions
Filter change with just one turn
No professional tools required
PD1000-TAM4 reverse osmosis system connected to refrigerator ice maker and IMC-1 kit usage
Versatile use and connection for ice cube makers

Compatible with refrigerator, ice maker and optional mini tank

The PD1000-TAM4 supports various applications, including connection to refrigerators or ice makers with compatible accessories such as the IMC-1.

In addition, the system can optionally be expanded with the separately available MWT3 mini tank and thus adapted to different household requirements.

Compatible with the connection kit for ice cube makers (IMC-1)
Connection to a refrigerator possible
Compatible with the optional MWT3 mini tank
Flexible uses in the household

Compare Frizzlife high-flow RO systems

The PD1000-TAM4 is suitable for households that want high daily water output, a space-saving tankless installation and improved taste through the remineralization stage after RO filtration.

Show product
Copied successfully!