Sistema di filtraggio dell'acqua a osmosi inversa Frizzlife - Filtro per acqua RO sottobanco a flusso rapido da 600 GPD, senza serbatoio, riduce i TDS, 8 stadi, 1,5:1 puro allo scarico, compatto, PX600

Name: Sistema di filtraggio dell'acqua a osmosi inversa Frizzlife - Filtro per acqua RO sottobanco a flusso rapido da 600 GPD, senza serbatoio, riduce i TDS, 8 stadi, 1,5:1 puro allo scarico, compatto, PX600
Brand: Frizzlife
SKU: PX600
Price: 459.99 EUR
Availability: InStock

modello: PX600

Fast clean water in a compact tankless design

€459,99

certificato

Messaggio

Testing performed under NSF/ANSI standards 42&53&58. This system has been tested according to NSF/ANSI 42&53&58 for the reduction of substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permittable limit for the water leaving the ﬁlter as speciﬁed in NSF/ANSI 42&53&58

Servizio e vantaggi

Circa 25$

Garanzia gratuita di 1 anno (registrati e ricevi una protezione del 150%)

Resi entro 30 giorni

Servizio clienti a vita

Paga facilmente :

Standard NSF/ANSI

Visualizza il report

ANSI 372

Lead Content Compliance for Drinking Water Contact Materials
NSF/ANSI/CAN 372 is a standard used to evaluate the lead content of materials and components that come into contact with drinking water. Products tested to this standard are evaluated against lead content requirements for drinking water system materials.
This standard focuses on lead content in water-contact materials. It should not be confused with contaminant reduction performance standards such as NSF/ANSI 42, 53, or 58.

specifiche

modello

PX600

Applicazioni

Under-Sink

portata

0.42GPM / 600GPD

Dimensioni

5.1”L x 14.9"W x 16.9"H

rapporto di scarico

2:1

Nessun deposito

Installazione

Montaggio richiesto
Drill a hole in the countertop

Alimentazione richiesta

Remineralizzazione

Dettagli sulla certificazione

NSF/ANSI 372
SGS Certified

processo di pulizia

0.0001 μm Reverse Osmosis Filtration

Materiale

BPA-FREE

Filtro di ricambio

Manuale dell'utente

Manuale dell'utente

FAQ

Why TDS is higher at the beginning, but back to normal range after about one minute?

Osmosis is a natural phenomenon happens in all RO system, no matter if you have a conventional RO system or tankless RO system. When the RO system starts to work, pressure from the pump overcomes natural osmotic pressure, forcing feed water through the RO membrane that removes the impurities. When the RO system stops working, the pump stops offering pressure as well. At that time, because of different concentrations, a small fraction of ions will enter into pure water and cause TDS to rise by a small amount. However, even if the TDS reading is a little high at the beginning, the quality water is still unbeatable by any other filtration methods including carbon, KDF, ceramic, UF, UV, etc.. The water is totally good to drink and you donít have to wait for about 1 minute to get the water, since the whole system will not release any harmful substances to the water. The TDS removing rate for PX600 is about 94-95%, if your incoming TDS is high, the outlet TDS will be high too.

Why out TDS value of PX600 is higher than normal RO system?

The first two stages of the system are able to eliminate more than 99.99% of all substances from your tap water, removing more than 94% of TDS value. The pure water then goes through the 3rd remineralized stage of the system which restores essential minerals, adjusts PH level and further polishes the water taste, serving customers with optimal water solution. However, the essential elements such as calcium and magnesium may raise the TDS value of the water again. If you consider the remineralized water to be undesirable, please contact us for an exchange of the last alkaline filter to post carbon filter.

Why there are many white bubbles in the water?

Normally for the first time use of the RO system, the water seems to have white bubbles in it, which is normal and totally drinkable.

It is because when the pump is pressurizing the water, it will pressurize the air at the same time.

It will make the air molecules smaller, thus the solubility further increases.

The air can’t be released at that time because of the pressure in the RO system.

However, when you turn on the tap to get a cup of water, the pressure of air is released.

So you will see a huge number of bubbles in the water.

It looks cloudy and white, but they are just bubbles.

After you put the water still for a while, all bubbles will be gone, the water is totally good for drinking.

My granite is thicker than 1.9 inch and the faucet stem is not long enough, what should I do?

Please feel free to contact us to claim for a longer thread stem. Simply email us your order ID, full name, shipping address and contact phone number for delivery. We will arrange the shipment for you ASAP.

Why the system does not work after connecting the power cord?

Maybe you have plugged the power cord into the socket specially designed for garbage disposal, please change another socket.