Sistema di osmosi inversa Frizzlife da 600 GPD con alcalinizzazione e remineralizzazione, PD600-TAM3

Name: Sistema di osmosi inversa Frizzlife da 600 GPD con alcalinizzazione e remineralizzazione, PD600-TAM3
Brand: Frizzlife
SKU: PD600-TAM3
Price: 429.99 EUR
Availability: InStock

modello: PD600-TAM3

Fast clean alkaline water in a compact design

€429,99

certificato

Messaggio

Geprüft nach NSF/ANSI 42, 53 & 58. Dieses System wurde gemäß NSF/ANSI 42, 53 & 58 getestet und reduziert die unten aufgeführten Stoffe zuverlässig. Die Konzentration dieser Stoffe im einströmenden Wasser wird auf einen Wert gesenkt, der den zulässigen Grenzwerten für gefiltertes Wasser entspricht oder darunter liegt.

Servizio e vantaggi

Circa 25$

Garanzia gratuita di 1 anno (registrati e ricevi una protezione del 150%)

Resi entro 30 giorni

Servizio clienti a vita

Paga facilmente :

Standard NSF/ANSI

Visualizza il report

NSF/ANSI 42

Improve Taste, Odor, and Aesthetic Water Quality
NSF/ANSI 42 applies to drinking water treatment systems certified to reduce aesthetic, non-health-related impurities. These may include chlorine taste and odor, unpleasant smell, and other factors that affect how water tastes, smells, or looks.
A product certified to NSF/ANSI 42 is typically chosen to improve the everyday drinking experience. However, this standard is not intended to verify reduction of health-related contaminants such as lead, arsenic, or PFAS unless those claims are certified under another applicable standard.

specifiche

modello

PD600-TAM3

Applicazioni

Under-Sink

portata

0.41 GPM / 600GPD

Dimensioni

PD600: 5.3"L x 14.7"W x 15.5"
TAM3: 5" x 5" x 13.5"

GPD

600

rapporto di scarico

2:1

Nessun deposito

Installazione

Montaggio richiesto
Drill a hole in the countertop

Alimentazione richiesta

Remineralizzazione

Dettagli sulla certificazione

NSF/ANSI 372
NSF/ANSI 42
NSF/ANSI 53
NSF/ANSI 58
SGS Certified

processo di pulizia

0.0001 μm Reverse Osmosis Filtration
Alkaline/Remineralize

Materiale

1. Pleated Carbon Compound filter
2. 600G RO membrane,
3. Alkaline Remineralization filter
4. Stainless steel faucet with brushed nickel finish.

Filtro di ricambio

Manuale dell'utente

Manuale dell'utente

FAQ

Why there are many white bubbles in the water?

Normally, for the first-time use of the RO system, the water may appear to have white bubbles in it.
This is normal and the water is completely safe to drink.
It happens because when the pump is pressurizing the water, it also pressurizes the air at the same time. This compresses the air molecules, which increases their solubility in the water. The air cannot be released at that moment due to the pressure inside the RO system.
However, when you turn on the tap and pour a glass of water, the pressure is released. As a result, a large number of bubbles form in the water. It may look cloudy or white, but these are only air bubbles.
If you leave the water standing for a while, the bubbles will disappear completely, and the water will be perfectly safe for drinking.

TDS tester pen shows higher result than the TDS number displayed on the PD600-TAM3?

It is because the TAM3 filter (the post filter) adds minerals to the water.
Normally, the TAM3 will increase the TDS by 10–30 ppm.
If the system hasn’t been used for a while, the TAM3 will restore more minerals to the water. At that time, the water is of very good quality, and the pH level may be higher than 9.

Why TDS is higher at the beginning, but back to normal range after about one minute?

Osmosis is a natural phenomenon that occurs in all RO systems, whether it is a conventional RO system or a tankless RO system.
When the RO system starts working, the pressure from the pump overcomes the natural osmotic pressure, forcing the feed water through the RO membrane, which removes impurities.
When the RO system stops working, the pump also stops providing pressure. At this point, due to differences in concentration, a small fraction of ions may enter the purified water, causing the TDS to rise slightly.
However, even if the TDS reading is slightly high at the beginning, the water quality is still superior to that produced by other filtration methods, including carbon, KDF, ceramic, UF, UV, etc. The water is completely safe to drink, and there is no need to wait for about 1 minute before using it, since the system does not release any harmful substances into the water.
The TDS removal rate for the PD600-TAM3 is about 94–95%. If the incoming TDS is high, the outlet TDS will also be relatively higher.

How does the TDS display on the machine work?

When the system is running, the TDS sensor in the PD600-TAM4 will keep testing the water quality every 1 minute. Therefore, the TDS result you see from the machine is from the last test memory.
If you want to have the real-time TDS result, please let the machine run for about 1 minute.

If I don’t want to use the TAM3, how should I disconnect it?

You don’t have to disconnect the tubing and the fittings on the TAM3. You only need to unscrew the TAM3 filter and the water still can go through.

My granite is thicker than 1.5 inch and the faucet stem is not long enough, what should I do?

Please feel free to contact us at support@frizzlife.com to claim for a longer thread stem.

Di più