Q: Why are there many white bubbles in the water?

A: Normally, the water appears to contain white bubbles when the RO system is first used,

which is normal and absolutely drinkable. This is because the pump puts the water under pressure,

will simultaneously pressurize the air. This makes the air molecules smaller, thereby increasing the solubility

continues to rise. The air cannot be released at this point due to the pressure in the RO system.

However, when you turn on the faucet to get a cup of water, the air pressure is released.

You will see a large number of bubbles in the water. It looks cloudy and white, but they are only

Bubbles. After you have left the water still for a while, all the bubbles will disappear and the water will be completely

good to drink.

Q: Does the TDS test pen show a higher result than the TDS number displayed on the PD600-TAM3?

A: This is because the TAM3 filter, the post-filter, adds minerals to the water. Normally, the TAM3

increases the TDS by 10-30 ppm. If the system has not been used for a while, the TAM3

to return more minerals to the water, and at this time the water is very good, the PH value is

more than 9

Q: Why is the TDS value higher at the beginning but returns to normal after about a minute?

A: Osmosis is a natural phenomenon that occurs in all RO systems, whether you have a conventional

RO system or tankless RO system. When the RO system starts working, the pressure from the pump

overcomes the natural osmotic pressure and presses the feed water through the RO membrane, which

the contaminants. If the RO system stops working, the pump also stops delivering pressure.

At this point, a small portion of the ions enters pure water due to different concentrations.

and increase the TDS value by a small amount. But even if the TDS value is

Initially, the quality of the water is still unbeatable by all other filtering methods including carbon,

KDF, ceramic, UF, UV, etc. The water is absolutely drinkable and you do not have to wait until

1 minute to get the water, as the whole system does not release any harmful substances to the

Water. The TDS removal rate for PD600-TAM3 is about 94-95%. If your incoming TDS is high, the outlet

The TDS will also be high.

Q: How does the TDS display on the machine work?

A: When the system is running, the TDS sensor in the PD600-TAM3 continuously tests the water quality

every minute. Therefore, the TDS result you see from the device comes from the last test memory.

If you want to get the TDS result in real time, please let the machine run for about 1 minute.

Q: If I don't want to use the TAM3, how do I disconnect it?

A: You do not need to disconnect the hoses and connections on the TAM3. You only need to

the TAM3 filter and the water can still pass through.

Q: My granite is thicker than 1.5 inches and the faucet stem isn't long enough. What should I do?

A: Please do not hesitate to contact us support@frizzlife.com to require a longer threaded shaft.