Chauffe-eau instantané Frizzlife 600 GPD avec système d'osmose inverse, alcalinisation et reminéralisation, PD600-TAM3
Chauffe-eau instantané Frizzlife 600 GPD avec système d'osmose inverse, alcalinisation et reminéralisation, PD600-TAM3 est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Dépêchez-vous ! Cette offre se termine bientôt.
Paiement sécurisé garanti
Vos informations de paiement seront traitées en toute sécurité.
Nous ne conservons pas les informations relatives aux cartes de crédit et n'avons aucun accès à vos informations de carte de crédit.
FAQ sur le code de réduction
1. Comment utiliser le code de réduction ?
Copiez le code de réduction à partir de la page du produit, puis appliquez le code de réduction au moment du départ.
2. Puis-je échanger plusieurs codes de réduction ?
Non. Les codes de réduction ne peuvent être combinés. Un seul code peut être appliqué par commande.
3. Pourquoi mon code de réduction est-il invalide ?
1) Le code de réduction n'est pas applicable aux articles que vous souhaitez acheter.
2) Le code de réduction n'a pas été saisi correctement.
3) Le code de réduction a expiré.
4) Le code de réduction ne provient pas du site officiel de FrizzLife. Pour toute question, n'hésitez pas à contacter notre service client : support@frizzlife.com
Chauffe-eau instantané Frizzlife 600 GPD avec système d'osmose ...
Certification
Certification
Fonctionnalité principale
Fonctionnalité principale
【Remineralization and alkalization under the sink water filter】The water from the RO membrane is slightly acidic, which also removes natural minerals. The third stage of filtration solves both problems of conventional RO systems! It balances the alkalinity of the RO water and adjusts the pH to above 7.5. Drinking slightly alkaline water is beneficial to your health. It also adds health-promoting essential minerals to your water. The Frizzlife PD600 produces the healthiest and best-tasting water for you.
【Reverse osmosis system without tank design under the sink】The Frizzlife PD600 uses a tankless design. The compact and sleek filter system, with its small and convenient footprint, takes up less space and saves storage under the kitchen sink! No tank also means no secondary pollution. Guaranteed ultra-pure, safe, and clean water for you and your family.
【600 GPD High Water Flow】The PD600 reverse osmosis water filter system features an internal prompt and can produce 600 gallons of water per day. Its large capacity can meet the daily water needs of a large family. The water flow is fast and stable, and the system can fill a 330 ml cup of water in about 10 seconds. Get a full cup of fresh RO water in no time!
【1.5:1 low discharge ratio】Thanks to advanced water-saving technology, the Frizzlife PD600 RO system maximizes efficiency and can save up to 450% water compared to conventional RO filtration systems on the market! It's both economical and environmentally friendly, making your water bill more affordable. Over the lifetime of the system, the PD600 RO filtration system will pay for itself in water savings!
【Intelligent LED display and quick changeThe intelligent display panel shows the TDS level and remaining lifespan of each filter in real time. The integrated TDS system monitors the quality of your drinking water 24/7. The color-coded indicators serve as a smart reminder, always reminding you to change the filters on time. With all parts included and well-structured instructions and videos included, you can install the Frizzlife PD24 RO filter yourself in just a few minutes.
Q: Why are there many white bubbles in the water?
A: Normally, the water appears to contain white bubbles when the RO system is first used,
which is normal and absolutely drinkable. This is because the pump puts the water under pressure,
will simultaneously pressurize the air. This makes the air molecules smaller, thereby increasing the solubility
continues to rise. The air cannot be released at this point due to the pressure in the RO system.
However, when you turn on the faucet to get a cup of water, the air pressure is released.
You will see a large number of bubbles in the water. It looks cloudy and white, but they are only
Bubbles. After you have left the water still for a while, all the bubbles will disappear and the water will be completely
good to drink.
Q: Does the TDS test pen show a higher result than the TDS number displayed on the PD600-TAM3?
A: This is because the TAM3 filter, the post-filter, adds minerals to the water. Normally, the TAM3
increases the TDS by 10-30 ppm. If the system has not been used for a while, the TAM3
to return more minerals to the water, and at this time the water is very good, the PH value is
more than 9
Q: Why is the TDS value higher at the beginning but returns to normal after about a minute?
A: Osmosis is a natural phenomenon that occurs in all RO systems, whether you have a conventional
RO system or tankless RO system. When the RO system starts working, the pressure from the pump
overcomes the natural osmotic pressure and presses the feed water through the RO membrane, which
the contaminants. If the RO system stops working, the pump also stops delivering pressure.
At this point, a small portion of the ions enters pure water due to different concentrations.
and increase the TDS value by a small amount. But even if the TDS value is
Initially, the quality of the water is still unbeatable by all other filtering methods including carbon,
KDF, ceramic, UF, UV, etc. The water is absolutely drinkable and you do not have to wait until
1 minute to get the water, as the whole system does not release any harmful substances to the
Water. The TDS removal rate for PD600-TAM3 is about 94-95%. If your incoming TDS is high, the outlet
The TDS will also be high.
Q: How does the TDS display on the machine work?
A: When the system is running, the TDS sensor in the PD600-TAM3 continuously tests the water quality
every minute. Therefore, the TDS result you see from the device comes from the last test memory.
If you want to get the TDS result in real time, please let the machine run for about 1 minute.
Q: If I don't want to use the TAM3, how do I disconnect it?
A: You do not need to disconnect the hoses and connections on the TAM3. You only need to
the TAM3 filter and the water can still pass through.
Q: My granite is thicker than 1.5 inches and the faucet stem isn't long enough. What should I do?
A: Please do not hesitate to contact us support@frizzlife.com to require a longer threaded shaft.
| Model No. | PD600-TAM3 | Filter cartridge inside | ASR211, ASR212, TAM3 |
| Product dimensions | 14.7 x 5.3 x 15.5 inches | Item weight | 33.06 g |
| Working pressure | Min. 20 psi, max. 80 psi | Flow rate | 0.41 GPM |
| Nominal voltage | 110-240 VAC | Special matching logic or templates | 50-60 Hz |
| Rated power | 85 W | Ambient temperature range | Min. 39ºF, Max. 100ºF |
Passer en revue
Chauffe-eau instantané Frizzlife 600 GPD avec système d'osmose inverse, alcalinisation et reminéralisation, PD600-TAM3