Frizzlife 600 GPD throughlauferhitzer reversal osmosesy system with alkalinization and remineralization, PD600-TAM3
Certification
Certification
Service & Benefits
Discount code FAQ
1.How do I use the discount code?
Copy the discount code from the product page, and then apply the discount code at check out.
2.Can I redeem multiple discount codes?
No.Discount codes cannot be combined.Only one code can be applied per order.
3.Why is my discount code invalid?
1) The discount code is not applicable to the specific items you want to buy
2) The discount code wasn't entered correctly
3) The discount code has expired
4) The discount code is not from frizzlife official websiteIf you have any questions, please feel free to reach out to our customer service team:support@frizzlife.com
key Features
【Remineralization & Alkalization Under Sink Water Filter】The water from RO membrane is slightly acidic, which also removes natural mineral. The 3rd stage of filter solves both issues of conventional RO systems! It balances the alkalinity of RO water and adjusts the PH to more than 7.5. Drinking weakly alkaline water is beneficial to your health. It also restores health-benefiting essential minerals to your water. Frizzlife PD600 produces healthiest and greatest tasting water for you.
【No Tank Design Under Sink Reverse Osmosis System】Frizzlife PD600 adopts tankless design. Compact and sleek filter system with a small and convenient footprint takes up less space, saves storage under kitchen sink! No tank also means no more secondary pollution. Guaranteed to provide ultra-pure, safe and clean water for you and your family.
【600 GPD High Water Flow】PD600 Reverse Osmosis water filter system adopts internal prompt and can produce 600 gallons water per day. High capacity can serve the daily water needs of large family. Water flow is fast and stable, the system can fill a 330ml cup of water in about 10 seconds. Get a full cup of fresh RO water in a snap!
【2:1 Low Drain Ratio】Thanks to advanced water-saving technology, Frizzlife PD600 RO system maximizes the efficiency and can save your water up to 450% compared with conventional RO filter systems on market! Being both economic and environmental friendly, it makes your water bills more affordable. Over the life of the system, PD600 RO filter system pays for itself in water savings!
【Smart LED Display & Quick Change】The smart display panel clearly tells real-time out TDS and remaining lifespan of each filter. The built-in TDS system constantly monitors the quality of your drinking water 24/7. Acting as a intelligent reminder, the color-coded indicators will always remind you to change filters in advance. With all parts included and well-organized instructions and videos, Frizzlife PD600 RO filter can be completely installed in a few minutes by yourself.
- The system maximizes efficiency and can save up to 450% water compared to conventional RO filter systems on the market.
- It makes your water bills more affordable. Over the lifetime of the system, the system pays for itself through water savings!
- Advanced water-saving technology.
- The TAM filter (3rd stage) balances the alkalinity of the RO water and sets it above 7.5. Drinking weakly alkaline water is beneficial.
- It also adds health-promoting minerals to the water.
- 1. No more acidic water
- 2.Restoration of important minerals
- 3. Solves the problems of conventional RO systems
- The internal pump ensures a fast and stable water flow.
- It only takes about 10 seconds to fill a 330ml cup with fresh RO water.
- The high capacity can meet the daily water needs of large families and small businesses.
- 600 GPD
- Rated output: 0.41 GPM
- >The intelligent display informs you in real time about the TDS level and the remaining filter life. The integrated TDS system monitors the quality of your drinking water around the clock.
- The color-coded indicators always remind you to change the filters in time.
- ✔TDS in real time
- ✔Monitoring filter life
- The first two filter stages can be replaced with a single turn after switching off the power supply.
- You don't even have to disconnect the power supply when changing the last filter stage.
- Step-by-step instructions
- Well-organized video
- 1. Replace the 1st stage every 12 months: ASR211
- 2.Replace the 2nd stage every 2 years: ASR212-600G
- 3.Replace the 3rd stage every 12 months: FZ-4
Replacement filter
User manual
Products specifications
| Model No. | PD600-TAM3 | Filter cartridge inside | ASR211, ASR212, TAM3 |
| Product dimensions | 14.7 x 5.3 x 15.5 inches | Item weight | 33.06 g |
| Working pressure | Min. 20 psi, max. 80 psi | Flow rate | 0.41 GPM |
| Nominal voltage | 110-240 VAC | Special matching logic or templates | 50-60 Hz |
| Rated power | 85 W | Ambient temperature range | Min. 39ºF, Max. 100ºF |
FAQ
Q: Why are there many white bubbles in the water?
A: Normally, the water appears to contain white bubbles when the RO system is first used,
which is normal and absolutely drinkable. This is because the pump puts the water under pressure,
will simultaneously pressurize the air. This makes the air molecules smaller, thereby increasing the solubility
continues to rise. The air cannot be released at this point due to the pressure in the RO system.
However, when you turn on the faucet to get a cup of water, the air pressure is released.
You will see a large number of bubbles in the water. It looks cloudy and white, but they are only
Bubbles. After you have left the water still for a while, all the bubbles will disappear and the water will be completely
good to drink.
Q: Does the TDS test pen show a higher result than the TDS number displayed on the PD600-TAM3?
A: This is because the TAM3 filter, the post-filter, adds minerals to the water. Normally, the TAM3
increases the TDS by 10-30 ppm. If the system has not been used for a while, the TAM3
to return more minerals to the water, and at this time the water is very good, the PH value is
more than 9
Q: Why is the TDS value higher at the beginning but returns to normal after about a minute?
A: Osmosis is a natural phenomenon that occurs in all RO systems, whether you have a conventional
RO system or tankless RO system. When the RO system starts working, the pressure from the pump
overcomes the natural osmotic pressure and presses the feed water through the RO membrane, which
the contaminants. If the RO system stops working, the pump also stops delivering pressure.
At this point, a small portion of the ions enters pure water due to different concentrations.
and increase the TDS value by a small amount. But even if the TDS value is
Initially, the quality of the water is still unbeatable by all other filtering methods including carbon,
KDF, ceramic, UF, UV, etc. The water is absolutely drinkable and you do not have to wait until
1 minute to get the water, as the whole system does not release any harmful substances to the
Water. The TDS removal rate for PD600-TAM3 is about 94-95%. If your incoming TDS is high, the outlet
The TDS will also be high.
Q: How does the TDS display on the machine work?
A: When the system is running, the TDS sensor in the PD600-TAM3 continuously tests the water quality
every minute. Therefore, the TDS result you see from the device comes from the last test memory.
If you want to get the TDS result in real time, please let the machine run for about 1 minute.
Q: If I don't want to use the TAM3, how do I disconnect it?
A: You do not need to disconnect the hoses and connections on the TAM3. You only need to
the TAM3 filter and the water can still pass through.
Q: My granite is thicker than 1.5 inches and the faucet stem isn't long enough. What should I do?
A: Please do not hesitate to contact us support@frizzlife.com to require a longer threaded shaft.
